螺栓
螺柱
螺钉
螺母
焊接螺丝
自攻/木螺钉
垫圈
挡圈
销
铆接件
组合件
工具和其他紧固件
ASME/ANSI B18.6.3-8-2013
D牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type D Cross recessed 80° oval countersunk head self tapping cutting screw-Table 8
F牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type F Cross recessed 80° oval countersunk head self tapping cutting screw-Table 8
G牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type G Cross recessed 80° oval countersunk head self tapping cutting screw-Table 8
T牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type T Cross recessed 80° oval countersunk head self tapping cutting screw-Table 8
C牙80°米字槽(Z型)半沉头自攻螺钉 表8
Type C Cross recessed 80° oval countersunk head tapping screws-Table 8
D牙细牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type D Cross recessed 80° oval countersunk head self tapping cutting screw with fine pitch thread-Table 8
F牙细牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type F Cross recessed 80° oval countersunk head self tapping cutting screw with fine pitch thread-Table 8
G牙细牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type G Cross recessed 80° oval countersunk head self tapping cutting screw with fine pitch thread-Table 8
T牙细牙80°米字槽(Z型)半沉头割尾自攻螺钉 表8
Type T Cross recessed 80° oval countersunk head self tapping cutting screw with fine pitch thread-Table 8
C牙细牙80°米字槽(Z型)半沉头自攻螺钉 表8
Type C Cross recessed 80° oval countersunk head tapping screws with fine pitch thread-Table 8
GB/T 891-1986
螺钉紧固轴端带孔挡圈
Lock rings at the end of shaft with screw with holes
螺钉紧固轴端挡圈
Lock rings at the end of shaft
GB/T 892-1986
螺栓紧固轴端带孔挡圈
Lock rings at the end of shaft with bolt with holes
螺栓紧固轴端挡圈
Lock rings at the end of shaft with bolt
GB/T 883-1986
锥销锁紧挡圈
Lock rings with cone pin
GB/T 884-1986
螺钉锁紧挡圈(d≤30mm)
Lock rings with screws (d≤30mm)
螺钉锁紧挡圈(d>30mm)
Lock rings with screws (d>30mm)
BS 450-2-1958
90°开槽沉头螺钉 表2
Slotted 90° countersunk flat head screws-Table 2
GB/T 921-1986
钢丝锁圈
Round wire circlips
90°米字槽沉头螺钉 表2
Cross recessed 90° countersunk flat head screws-Table 2
1万5千+标准收录，涵盖18个国家地区，15个行业标准
数据由华人螺丝网 华网紧固云友情提供--合作联系：fastencloud@luosi.com
